Pontiac Timing Covers

KRE 1964-1968 Pontiac Aluminum Timing Cover

This is the new KRE 1964-1968 aluminum Pontiac timing cover!  This Pontiac timing cover is made by precision sand casting 356-T6 aluminum and comes with the following  features:

• Tin Indian Performance Crank Seal installed

•  heater nipple drilled 

• Has 0, 6, and 12 degree timing marks like the '69 and up KRE T cover

• Fully 5 axis CNC machined

• Has the dimple for Tripower intake manifolds

• Accepts ALL standard Pontiac parts from 1964-1968

  - fuel pumps and block offs

  - water pump sleeves

  - water pumps

  - water pump divider plates (both stock and aftermarket)

• Intake manifold crossover hole is sized for 1/8 pipe tap should you want to block it off

• Cast and machined in the U.S.A

KRE Pontiac 1969 and later Aluminum Timing Cover

This is the new KRE aluminum Pontiac timing cover!  This Pontiac timing cover is made by precision sand casting 356-T6 aluminum.  The timing cover comes with the following  features:

• Tin Indian Performance Crank Seal installed

• Heater nipple drilled 

• Has 0, 6, and 12 degree timing marks like the original 1969 Pontiac timing cover

• Fully 5 axis CNC machined

• Accepts ALL standard Pontiac parts from 1969 and up

  - fuel pumps and block offs

  - water pump sleeves

  - water pumps

  - water pump divider plates

• Intake manifold crossover hole is sized for 1/8 pipe tap should you want to block it off

• Cast and machined in the U.S.A

Motor plate version NOW available!

Don't forget the these important parts when installing the new KRE Pontiac Timing Cover! 

• Pontiac water pump divider plate 

• Pontiac water pump sleeves

• Pontiac timing cover gasket

• Oil pan lip gasket

• water pump

• water pump gasket

• fuel pump gasket

Pontiac Timing Cover Accessories

Pontiac Water Pump Divider - Late

Pontiac Water Pump Divider - Early

These are our early Pontiac water pump dividers!  These water pump dividers are placed behind the water pump  in the timing cover for use with a stock style water pump on 1968 and earlier Pontiac timing covers.  These water pump divider plates are essential to efficient stock water pump operation.  This is a frequently overlooked part  in your Pontiac's cooling system.  If your replacing your water pump you should inspect and replace this water pump divider if necessary.   Please note:  This divider does NOT use Pontiac water pump sleeves .

WP-001E

Shop our new website here......

Pontiac Water Pump Sleeves

These seals are placed in the timing cover holes for use with a stock style water pump on 1969 and up Pontiac timing covers.  These sleeves are essential to efficient water pump operation.  This is a frequently overlooked part  in your Pontiac's cooling system.  If your replacing your water pump you should inspect and replace these sleeves if necessary.  These replace GM part # 9796347

Pontiac Timing Cover Gasket

   These gaskets are made from high quality Interface material and are .035 thick.  

Teflon Pontiac Timing Cover Gasket

   These gaskets are made from high quality teflon and are .035 thick.  

(paper gasket pictured)

Pontiac Water Pump Gasket

   These gaskets are made from high quality Interface material and are .035 thick.  

Teflon Pontiac Water Pump Gasket

   These gaskets are made from high quality Interface material are are .035 thick. 

(paper gasket pictured )

Pontiac Fuel Pump Blockoff Gasket

   These gaskets are made from high quality Interface material and are .035 thick.  

Teflon Pontiac Fuel Pump Blockoff Gasket

   These gaskets are made from high quality teflon and are .075 thick. 

(paper gasket pictured) 

Pontiac Oil Pan to Timing Cover Lip Gasket

Pontiac Timing Cover Washer

Pontiac Timing Cover Lift Hook

Pontiac Water Pumps

Standard pumps are rated at 35 GPM and the HD pumps are rated at 40 GPM.

Flow Kooler Water Pumps

Cast Iron Pontiac Water Pump

fits 1968 and earlier Pontiac timing cover - 8 bolt pump

TIP-WP-006E

Shop our new website here......